In 2026, benchmark bulk pricing is $38 to $62 per Ton ($48 to $80 per Cubic Yard) with Bulk Saves 62% Over Bags. Compare local quarry rates, dump truck delivery tariffs, and bulk vs. 50-lb bag savings.
Specification & Reference Table: 2026 Delivered Truckload & Hauling Capacity Comparison
| Vehicle / Truck Class | Safe Payload Tonnage | Cubic Yards (Avg) | Sq Ft Covered @ 4" Deep | Typical 2026 Delivery Fee |
|---|---|---|---|---|
| Half-Ton Pickup (F-150 / 1500) | 0.75 tons | 0.55 yd³ | 45 sq ft | Self-Haul |
| 3/4-Ton Pickup (F-250 / 2500) | 1.35 tons | 1.00 yd³ | 81 sq ft | Self-Haul |
| 10k GVWR Dump Trailer (6×10 / 6×12) | 3.25 – 3.60 tons | 2.40 – 2.65 yd³ | 195 – 215 sq ft | Self-Haul |
| 12k–14k GVWR Dump Trailer (7×12) | 3.80 – 4.50 tons | 2.80 – 3.35 yd³ | 225 – 270 sq ft | Self-Haul |
| 14k GVWR Dump Trailer (7×14 / 8×16) | 4.75 – 5.25 tons | 3.50 – 3.90 yd³ | 283 – 315 sq ft | Self-Haul |
| Single-Axle Dump Truck (6-Whl) | 6 – 8 tons | 4.5 – 6 yd³ | 365 – 485 sq ft | $110 – $165 |
| Tandem-Axle Dump Truck (10-Whl) | 13 – 16 tons | 9.5 – 12 yd³ | 770 – 970 sq ft | $135 – $195 |
| Tri-Axle Dump Truck | 18 – 22 tons | 13.5 – 16 yd³ | 1,090 – 1,300 sq ft | $165 – $240 |
| End-Dump Semi Trailer | 24 – 28 tons | 18 – 21 yd³ | 1,450 – 1,700 sq ft | $210 – $320 |
Bulk Density & Moisture Physics (Pea Gravel Cost Per Ton & Cubic Yard): When ordering quarry materials or scheduling dump truck dispatch, understanding the difference between loose cubic yard volume and certified scale tonnage is critical. Standard open-graded crushed stone (such as washed ASTM #57, #67, or #8 stone) maintains a loose bulk density of 2,640 to 2,720 lbs per cubic yard (1.32 to 1.36 US short tons/yd³) with a 38%–40% void ratio. Dense-graded road bases containing stone dust fines (such as #411 Crusher Run, #304 Limestone, Item #4, or Caltrans Class 2 AB) pack tighter and weigh 2,920 to 3,000 lbs per cubic yard (1.46 to 1.50 US short tons/yd³). After stockpile rain events, retained surface moisture can increase scale ticket weight by 5% to 12% on stone and up to 20% on sand or screened topsoil.
Loose vs. Compacted Volume (12%–18% Shrinkage Factor): Every cubic yard table measures in-place geometric volume before mechanical compaction. Once you spread aggregate and make 3 to 4 passes with a 5,000-lb vibratory plate compactor or smooth-drum roller, angular particles rotate into void spaces and the lift thickness compresses by 12% to 18% (and up to 20% for Decomposed Granite or Crusher Run). Regional mineralogy also shifts yield: dolomitic limestone and granite average 1.35–1.48 tons/yd³, dense Pacific Northwest basalt reaches 1.52 tons/yd³, and porous volcanic scoria or lava rock weighs just 0.65–0.78 tons/yd³.
Step-by-Step Tonnage, Volume & Cost Calculation
To eliminate mid-project material shortages or paying a second dump truck mobilization fee, professional estimators calculate takeoff quantities for Pea Gravel Cost Per Ton & Cubic Yard using three standardized civil engineering formulas:
1. Cubic Yards from Inches:
Area (sq ft) × Compacted Depth (in) ÷ 324 = Net Cubic Yards (yd³)2. US Short Tons Conversion:
Net Cubic Yards × Bulk Density (1.35 to 1.48 tons/yd³) × 1.12 Compaction Factor = Order Tons3. Total Delivered Price:
(Order Tons × Quarry Price/Ton) + (Number of Truckloads × Haul Fee) = Total Delivered Cost
Worked Job-Site Example (600 Sq Ft Project @ 4" Compacted Depth): Suppose you are preparing a 12 ft × 50 ft (600 sq ft) area at a 4-inch compacted depth. Using the volume formula, 600 sq ft × 4 in ÷ 324 = 7.41 net cubic yards (200 cubic feet). Multiplying 7.41 yd³ × 1.42 tons/yd³ yields 10.52 net tons. Adding a 12% vibratory compaction and grading buffer brings your quarry order to 11.78 US short tons (8.30 cubic yards)—which fits cleanly inside a single 15-ton tandem-axle dump truck load. At a 2026 benchmark rate of $36/ton material ($424) plus a $155 local haul fee, total delivered job cost is $579 ($0.97 per sq ft).
Bulk Dump Truck Delivery vs. Buying 50-Lb (0.5 Cu Ft) Bags: Hardware store gravel, sand, and stone are sold in 50-lb bags containing 0.50 cubic feet. Because 1 cubic yard equals 27 cubic feet, it takes 54 bags to equal 1 cubic yard (and 40 bags to equal 1 US short ton). For the 8.30-cubic-yard example above, buying bagged stone would require 448 individual 50-lb bags costing $2,240+ at $5.00/bag—nearly 4× more expensive than a single $579 bulk dump truck drop. Bulk delivery beats bagged material on every project exceeding 1.5 tons (60 bags).
Material Grade Comparison & Contractor Installation Best Practices
Selecting the right aggregate gradation and sub-base assembly determines whether your installation stays laser-level for 20 years or ruts and pumps mud after the first freeze-thaw season. Compare the four primary contractor aggregate classes below:
| Aggregate Class & Grade | Bulk Density | Compaction Buffer | Optimal Lift Depth & Geotextile Pairing | Primary Engineering Application |
|---|---|---|---|---|
| Dense-Graded Base (#411, #304, Item #4, Class 2 AB) | 1.48 – 1.50 T/yd³ | +15% | 4"–6" lifts over woven stabilization fabric | Driveway structural base, paver sub-base, parking lots |
| Open-Graded Washed Stone (ASTM #57, #67, #4) | 1.32 – 1.36 T/yd³ | +10% | 3"–4" layer wrapped in 4 oz non-woven fabric | French drains, shed pads, retaining wall backfill, concrete slabs |
| Fine Screed & Pathway Stone (#8, #89, Pea Gravel, DG) | 1.32 – 1.46 T/yd³ | +12% – 18% | 1"–3" compacted or screeded top lift | Patio walkways, permeable paver bedding, xeriscape beds |
| Heavy Sub-Base & Armor (#1, #2, #3 Ballast, Riprap) | 1.28 – 1.30 T/yd³ | +10% | 6"–12" lift over heavy woven geotextile | Soft clay stabilization, construction entrances, ditch erosion armor |
- Sub-Base Excavation & Organic Stripping: Always strip 100% of sod, roots, and spongy black topsoil down to firm mineral subsoil. Topsoil decomposes and holds water, causing gravel layers to sink unevenly.
- Woven vs. Non-Woven Geotextile Fabric Selection: Roll out high-tensile woven stabilization geotextile (200–300 lb grab tensile) under driveways, parking pads, and road bases to separate clay from crushed stone. Use 4 oz to 6 oz needle-punched non-woven drainage fabric inside French drain trenches and behind retaining walls where high water permittivity is required.
- Compaction in 4-Inch Maximum Lifts: Never dump 8 to 12 inches of Crusher Run or road base and attempt to compact it in a single pass. Spread and compact in 3-inch to 4-inch lifts at optimum moisture content (lightly misted with a garden hose so stone dust binds tightly without turning soupy).
- Positive Drainage Slope & Edge Restraint: Grade driveways with a 2% to 3% center crown (1/4" to 3/8" drop per foot toward side ditches) and pitch patios 1/8" to 1/4" per foot away from building foundations. Secure decorative pea gravel or decomposed granite with steel, aluminum, or timber perimeter edging.
- Common Ordering Mistakes to Avoid: Never order washed #57 stone for a steep sloped driveway without a compacted #304/#411 base (clean stone rolls on grades over 6%), never exceed half-ton pickup axle payload limits (1 cubic yard = 2,700 lbs), and always verify overhead tree/wire clearance (24–28 ft raised bed height) before dump truck arrival.
Calculate Total Delivered Cost & Truck Loads
Enter your project dimensions and local per-ton price to see exact truckload counts and total budget.
Frequently Asked Questions
How do you calculate exact tons and cubic yards for Pea Gravel Cost Per Ton & Cubic Yard?
Area (sq ft) × Depth (in) ÷ 324 = Cubic Yards. Multiply cubic yards by the material bulk density (1.35 tons/yd³ for washed #57 or pea stone; 1.48 tons/yd³ for Crusher Run or road base) and add a 10% to 15% compaction buffer.