← Back to All 330 Contractor Guides
Shed & Structure Pads Published 2026-10-13 8 min read By Burim Bekteshi · Senior Aggregate Editor

14x28 14x28 Modular Cabin Pad Gravel Pad: 8.80 Tons @ 4" (16'x30' Spec)

Including a standard 1-foot perimeter overhang on all four sides, a 14' × 28' 14x28 modular cabin pad requires an excavated 16 ft × 30 ft pad (480 sq ft). Per our Shed Pad Gravel Calculator, at a 4-inch compacted depth, order 8.80 US tons (6.52 cubic yards) of washed ASTM #57 Crushed Stone; at a 6-inch depth, order 13.20 tons (9.78 cubic yards).

14x28 shed foundation gravel pad diagram
14x28 shed foundation gravel pad diagram
Need custom dimensions, overhang settings, or timber skid counts? Use our interactive Shed Pad Gravel Calculator to compute exact cubic yards, tons, and 50-lb bags for any shed size.
Shed Foundation Specification · 14' × 28' Structure (16' × 30' Pad)
How much gravel do you need for a 14×28 14x28 modular cabin pad pad?

Including a standard 1-foot perimeter overhang on all four sides, a 14' × 28' 14x28 modular cabin pad requires an excavated 16 ft × 30 ft pad (480 sq ft). Per our Shed Pad Gravel Calculator, at a 4-inch compacted depth, order 8.80 US tons (6.52 cubic yards) of washed ASTM #57 Crushed Stone; at a 6-inch depth, order 13.20 tons (9.78 cubic yards).

Recommended Pad Size16 ft × 30 ft (480 sq ft)
4" Depth (#57 Stone)8.80 Tons (6.52 yd³)
6" Depth (#57 Stone)13.20 Tons (9.78 yd³)
Border Timber Linear Ft92 Linear Feet

Specification & Reference Table: Why Your 14×28 Shed Needs a 16×30 Foot Overhang Pad

Shed manufacturers and structural delivery crews recommend building your gravel containment frame 12 inches wider on every side than the building footprint (14' × 28' = 392 sq ft building → 16' × 30' = 480 sq ft gravel pad). That overhang absorbs roof drip-line splashback, prevents floor runners from rotting near the edge, and distributes point loads evenly.

Tonnage, Cubic Yards & 50-Lb Bag Chart (14×28 Shed Pad)

Pad Footprint Gravel Depth Net Cubic Yards Order Cubic Yards (+10%) Order Tons (#57 Stone) 50-Lb Bags (If Bagged)
16' × 30' (With Overhang) 4 Inches (Standard) 5.93 yd³ 6.52 yd³ 8.80 tons 352 bags
16' × 30' (With Overhang) 6 Inches (Heavy / Sloped) 8.89 yd³ 9.78 yd³ 13.20 tons 529 bags
16' × 30' (With Overhang) 8 Inches (Frost / Tractor Load) 11.85 yd³ 13.04 yd³ 17.60 tons 704 bags

Bulk Density & Moisture Physics (14x28 14x28 Modular Cabin Pad Gravel Pad: 8.80 Tons @ 4" (16'x30' Spec): 8.80 Tons @ 4" (16'x30' Spec)): When ordering quarry materials or scheduling dump truck dispatch, understanding the difference between loose cubic yard volume and certified scale tonnage is critical. Standard open-graded crushed stone (such as washed ASTM #57, #67, or #8 stone) maintains a loose bulk density of 2,640 to 2,720 lbs per cubic yard (1.32 to 1.36 US short tons/yd³) with a 38%–40% void ratio. Dense-graded road bases containing stone dust fines (such as #411 Crusher Run, #304 Limestone, Item #4, or Caltrans Class 2 AB) pack tighter and weigh 2,920 to 3,000 lbs per cubic yard (1.46 to 1.50 US short tons/yd³). After stockpile rain events, retained surface moisture can increase scale ticket weight by 5% to 12% on stone and up to 20% on sand or screened topsoil.

Loose vs. Compacted Volume (12%–18% Shrinkage Factor): Every cubic yard table measures in-place geometric volume before mechanical compaction. Once you spread aggregate and make 3 to 4 passes with a 5,000-lb vibratory plate compactor or smooth-drum roller, angular particles rotate into void spaces and the lift thickness compresses by 12% to 18% (and up to 20% for Decomposed Granite or Crusher Run). Regional mineralogy also shifts yield: dolomitic limestone and granite average 1.35–1.48 tons/yd³, dense Pacific Northwest basalt reaches 1.52 tons/yd³, and porous volcanic scoria or lava rock weighs just 0.65–0.78 tons/yd³.

Step-by-Step Tonnage, Volume & Cost Calculation

To eliminate mid-project material shortages or paying a second dump truck mobilization fee, professional estimators calculate takeoff quantities for 14x28 14x28 Modular Cabin Pad Gravel Pad: 8.80 Tons @ 4" (16'x30' Spec): 8.80 Tons @ 4" (16'x30' Spec) using three standardized civil engineering formulas:

Contractor Job-Site Takeoff Formulas (14x28 14x28 Modular Cabin Pad Gravel Pad: 8.80 Tons @ 4" (16'x30' Spec): 8.80 Tons @ 4" (16'x30' Spec)):
1. Cubic Yards from Inches: Area (sq ft) × Compacted Depth (in) ÷ 324 = Net Cubic Yards (yd³)
2. US Short Tons Conversion: Net Cubic Yards × Bulk Density (1.35 to 1.48 tons/yd³) × 1.12 Compaction Factor = Order Tons
3. Total Delivered Price: (Order Tons × Quarry Price/Ton) + (Number of Truckloads × Haul Fee) = Total Delivered Cost

Worked Job-Site Example (600 Sq Ft Project @ 4" Compacted Depth): Suppose you are preparing a 12 ft × 50 ft (600 sq ft) area at a 4-inch compacted depth. Using the volume formula, 600 sq ft × 4 in ÷ 324 = 7.41 net cubic yards (200 cubic feet). Multiplying 7.41 yd³ × 1.42 tons/yd³ yields 10.52 net tons. Adding a 12% vibratory compaction and grading buffer brings your quarry order to 11.78 US short tons (8.30 cubic yards)—which fits cleanly inside a single 15-ton tandem-axle dump truck load. At a 2026 benchmark rate of $36/ton material ($424) plus a $155 local haul fee, total delivered job cost is $579 ($0.97 per sq ft).

Bulk Dump Truck Delivery vs. Buying 50-Lb (0.5 Cu Ft) Bags: Hardware store gravel, sand, and stone are sold in 50-lb bags containing 0.50 cubic feet. Because 1 cubic yard equals 27 cubic feet, it takes 54 bags to equal 1 cubic yard (and 40 bags to equal 1 US short ton). For the 8.30-cubic-yard example above, buying bagged stone would require 448 individual 50-lb bags costing $2,240+ at $5.00/bag—nearly 4× more expensive than a single $579 bulk dump truck drop. Bulk delivery beats bagged material on every project exceeding 1.5 tons (60 bags).

Material Grade Comparison & Contractor Installation Best Practices

Selecting the right aggregate gradation and sub-base assembly determines whether your installation stays laser-level for 20 years or ruts and pumps mud after the first freeze-thaw season. Compare the four primary contractor aggregate classes below:

Aggregate Class & Grade Bulk Density Compaction Buffer Optimal Lift Depth & Geotextile Pairing Primary Engineering Application
Dense-Graded Base (#411, #304, Item #4, Class 2 AB) 1.48 – 1.50 T/yd³ +15% 4"–6" lifts over woven stabilization fabric Driveway structural base, paver sub-base, parking lots
Open-Graded Washed Stone (ASTM #57, #67, #4) 1.32 – 1.36 T/yd³ +10% 3"–4" layer wrapped in 4 oz non-woven fabric French drains, shed pads, retaining wall backfill, concrete slabs
Fine Screed & Pathway Stone (#8, #89, Pea Gravel, DG) 1.32 – 1.46 T/yd³ +12% – 18% 1"–3" compacted or screeded top lift Patio walkways, permeable paver bedding, xeriscape beds
Heavy Sub-Base & Armor (#1, #2, #3 Ballast, Riprap) 1.28 – 1.30 T/yd³ +10% 6"–12" lift over heavy woven geotextile Soft clay stabilization, construction entrances, ditch erosion armor
  • Sub-Base Excavation & Organic Stripping: Always strip 100% of sod, roots, and spongy black topsoil down to firm mineral subsoil. Topsoil decomposes and holds water, causing gravel layers to sink unevenly.
  • Woven vs. Non-Woven Geotextile Fabric Selection: Roll out high-tensile woven stabilization geotextile (200–300 lb grab tensile) under driveways, parking pads, and road bases to separate clay from crushed stone. Use 4 oz to 6 oz needle-punched non-woven drainage fabric inside French drain trenches and behind retaining walls where high water permittivity is required.
  • Compaction in 4-Inch Maximum Lifts: Never dump 8 to 12 inches of Crusher Run or road base and attempt to compact it in a single pass. Spread and compact in 3-inch to 4-inch lifts at optimum moisture content (lightly misted with a garden hose so stone dust binds tightly without turning soupy).
  • Positive Drainage Slope & Edge Restraint: Grade driveways with a 2% to 3% center crown (1/4" to 3/8" drop per foot toward side ditches) and pitch patios 1/8" to 1/4" per foot away from building foundations. Secure decorative pea gravel or decomposed granite with steel, aluminum, or timber perimeter edging.
  • Common Ordering Mistakes to Avoid: Never order washed #57 stone for a steep sloped driveway without a compacted #304/#411 base (clean stone rolls on grades over 6%), never exceed half-ton pickup axle payload limits (1 cubic yard = 2,700 lbs), and always verify overhead tree/wire clearance (24–28 ft raised bed height) before dump truck arrival.
Interactive Shed Foundation Tool

Customize Overhang & Depth for Your 14×28 Pad

Open our Shed Foundation Gravel Pad Calculator to adjust overhang inches, stone density, and delivery costs.

Material Checklist for a 16' × 30' Timber-Framed Gravel Pad

  • Aggregate: 8.80 tons (4" depth) or 13.20 tons (6" depth) of washed ASTM #57 Crushed Stone (1/2"–1" angular limestone or granite).
  • Geotextile Fabric: 552 sq ft of 4–6 oz non-woven drainage/weed barrier fabric stapled across the excavated dirt floor.
  • Perimeter Timbers: 92 linear feet of Ground-Contact 4×6 or 6×6 pressure-treated timbers fastened at corners with 10-inch structural timber screws.
  • Anchoring Rebar: 23 pieces of 1/2" × 24" rebar driven through pre-drilled holes into the subgrade every 4 feet.

Frequently Asked Questions

How do you calculate exact tons and cubic yards for 14x28 14x28 Modular Cabin Pad Gravel Pad: 8.80 Tons @ 4" (16'x30' Spec): 8.80 Tons @ 4" (16'x30' Spec)?
Multiply your project length (ft) × width (ft) × depth (ft) and divide by 27 to get net cubic yards (yd³), or use the contractor shortcut Area (sq ft) × Depth (in) ÷ 324 = Cubic Yards. Multiply cubic yards by the material bulk density (1.35 tons/yd³ for washed #57 or pea stone; 1.48 tons/yd³ for Crusher Run or road base) and add a 10% to 15% compaction buffer.
How much area does 1 ton or 1 cubic yard cover for 14x28 14x28 Modular Cabin Pad Gravel Pad: 8.80 Tons @ 4" (16'x30' Spec): 8.80 Tons @ 4" (16'x30' Spec)?
One cubic yard (27 cu ft) covers 324 sq ft at 1" deep, 162 sq ft at 2" deep, 108 sq ft at 3" deep, 81 sq ft at 4" deep, and 54 sq ft at 6" deep. Because 1 US short ton (2,000 lbs) of standard gravel equals approximately 0.74 cubic yards (20 cu ft), 1 ton covers 120 sq ft at 2" deep, 80 sq ft at 3" deep, or 60 sq ft at 4" deep.
What compacted lift depth and geotextile fabric are recommended for 14x28 14x28 Modular Cabin Pad Gravel Pad: 8.80 Tons @ 4" (16'x30' Spec): 8.80 Tons @ 4" (16'x30' Spec)?
For walkways, landscape beds, and surface top-dressing, install 2 to 3 inches over non-woven landscape fabric. For shed pads, paver patio bases, and residential driveways, install 4 to 6 inches compacted in 3"–4" lifts with a vibratory plate compactor over a woven stabilization geotextile membrane. Heavy truck aprons and clay subgrades require an 8 to 12 inch multi-layer sub-base.
How much does bulk dump truck delivery cost compared to 50-lb bags in 2026?
In 2026, bulk quarry aggregate costs $26 to $55 per ton ($35 to $75 per cubic yard) plus a $125 to $195 dump truck delivery fee, putting a full 15-ton tandem dump truck load at $450 to $750 delivered. By contrast, buying 50-lb (0.5 cu ft) retail bags requires 54 bags per cubic yard (40 bags per ton) at $4.50–$6.50 per bag—costing $180 to $260 per ton. Bulk delivery is cheaper for any order above 1.5 to 2.0 tons.
PRO CONTRACTOR & HARDSCAPE TAKEOFF BUNDLE EXCEL (.XLSX) + GOOGLE SHEETS

Need Multi-Layer Takeoffs, Client PDF Proposals & Job Costing in Excel / Google Sheets?

Upgrade to the Pro Excavation, Hardscape & Aggregate Bid Workbook (Excel + Google Sheets)—engineered for contractors, landscapers, and estimators who want instant multi-layer assemblies, dirt spoils hauling math, crew labor markups, and printable client bid sheets.

01. Multi-Layer Driveway & Patio Assembly Takeoff
02. Excavation Spoils & Dump Truck Hauling Optimizer
03. French Drain & Retaining Wall Calculator
04. Crew Loaded Labor & Overhead Markup Calculator
05. Quarry & Supplier Price Book (VLOOKUP)
06. Client-Ready Printable Bid Proposal
07. Material Order & Dispatch Checklist
08. 12-Month Job Costing & Profit Tracker
$24 One-Time Download
Unlocked Formulas
Download Pro Workbook ($24) →
Works in Microsoft Excel, Google Sheets & Apple Numbers
Topics: 14x28 shed gravel pad, 16x30 gravel pad, #57 stone shed foundation
Open Shed Foundation Gravel Pad Calculator →

Related Shed & Structure Pads Guides